The D812 is completely updated with the latest input from HB team drivers Ty Tessmann and Atsushi Hara - from the front to rear, the car is fully optimized for top-level racing! |
The D812 chassis is constructed from tough and lightweight aluminum, and is designed to be narrow with all of its components sitting as low as possible. The narrowness and low CG allows for the best handling properites, which when combined with World-class suspension design, gives the HB racing team the unfair advantage on the track. |
A sturdy C-hub style front suspension handles things up front, with aluminum uprights, graphite steering knuckle arms and steel turnbuckles. Aluminum uprights and steel turnbuckles take care of getting the power to the ground at the rear end.
The shocks are long-stroke versions of the World Champion HB Big Bore shocks, which feature aluminum bodies with threaded bodies and threaded top and bottom caps. Controlling the chassis roll at each end of the car are conventional wire sway bars. |
Features Summary
- Centralized chassis weight for superior handling
- Monocoque style suspension arms for strength, stiffness, and ease of cleaning
- HB Big Bore threaded aluminium shocks for excellent suspension control
- Race-optimized steering
- Long stroke shocks for long suspension travel
- Lightweight drivetrain gears have less rotational mass for quicker acceleration
- Lightweight aluminum axles
- Graphite steering knuckle arms
- One-piece engine mount for easy engine installation without resetting gear mesh
- Aluminum front and rear shock towers
- CVD boots to retain grease in axles and keep dirt out
- Adjustable hinge pin heights, kickup, and anti-squat angle
- Adjustable rear toe-in (inboard and outboard)
- Steel skid plate in chassis to extend chassis life
- Aluminum front caster blocks
- Aluminum rear hub carriers
- One-piece radio tray
- Fuel clunk for continuous fuel pick-up even when upside down
- Low-profile air filter
- Front and rear anti-roll bars
- Threaded outer hinge pins
- Steel turnbuckles
- 2012 ROAR National Champion!
| |
HB D812 Spec:
Length: 480mm
Width: 310mm
Wheelbase: 327mm (adjustable)
|
|
What You Need:
- .21 size racing buggy engine
- Tuned exhaust pipe and header
- Tires
- Inserts
- 2-channel radio system with 2 servos, receiver and battery
- Fuel
- Fuel bottle
- Receiver battery pack
- Glow igniter
- Starter box
- Polycarbonate paint
|
Specification may be subject to change |
